BRAVO DP DUO KIT - Microfiltration
EAN: 4260303251295
€97,75
Including taxes. Shipping is calculated at checkout.
Technical specifications
10" filter housing
Suitable for all standard 10" cartridges with flat gasket and BX
Suitable for drinking water applications
Dimensions: 325 x 122 x 107 mm (HxWxD)
Operating pressure: maximum 8.0 bar
Temperature range: 4 - 45 °C
Drinking water filter
Manufacturer / Importer Information:
purway Crystal Group®
BONGARTZ GMBH
CEO Claudia Bongartz
Am Königshof 63a
27478 Cuxhaven
Germany
Email: info@purway.de
The BRAVO DUO DP under-sink water filters improve water quality through microfiltration, keeping the water clean and safe.
With the connection, they optimize system use and also enable the use of untreated water.
The BRAVO DUO DP allows space-saving installation above the sink and offers two filter stages and water treatment options.
The filter housing is patented. With the BRAVO DP under-sink water filters, waste and bottle consumption can be significantly reduced – an important contribution to environmental protection.
In combination with activated carbon filters for sediment removal, they improve water quality by reducing chlorine, unpleasant odors and flavors, contaminants, and microorganisms.
1 x FA 25 SX 5 mcr - Sediment wound filter
(Item No.: 4260303250120)
- Filtration of fine particles (rust, scale flakes, sand, flakes)
- Service life: approx. 6 months (depending on water quality and flow rate)
1 x CB-SI 10 SD 0,3 mcr - activated carbon block microfiltration (Item No.: 4260303252377)
The CARBON-BLOCK filters contaminants from tap water such as some
microorganisms / bacteria, chlorine, organic contaminants, pesticides,
taste impairments, and all very fine particles larger than
0,3 µm.
- Reduction of chlorine (bad taste and odor)
- Contaminants (pesticides, solvents, etc.)
- Service life: approx. 6 months (depending on water quality and flow rate)
Technical data
10" filter housing
Suitable for all standard 10" cartridges with flat gasket and BX
Suitable for drinking water applications
Dimensions: 325 x 122 x 107 mm (HxWxD)
Operating pressure: maximum 8,0 bar
Temperature range: 4 - 45 °C
Material selection
Housing head: reinforced polypropylene
Housing bowl: PET
O-ring: EPDM
Bleed valve: stainless steel, EPDM
Applications:
Drinking water filter
You will receive a filter housing with 2 x cartridges 1 x wall bracket W2 and 1 x housing wrench packed in the box.
Please fill out the following form to submit your withdrawal request.