CB-SI 10 SD 0,3 mcr - Activated Carbon Block Microfiltration
EAN: 4260303252377
€29,75
Including taxes. Shipping is calculated at checkout.
10" inch filter dimensions:
Length: 248 mm
Width: 67 mm
Head opening: 25 mm
Maximum pressure: 6.0 bar
Temperature range: 4 - 45 °C
Recommended max. flow rate: 300 l/h.
The best drinking water filtration against microorganisms and bacteria > 0.3 µm
Manufacturer / Importer Information:
purway Crystal Group®
BONGARTZ GMBH
CEO Claudia Bongartz
Am Königshof 63a
27478 Cuxhaven
Germany
Email: info@purway.de
CB-SI 10 SD 0,3 Micron for the best drinking water filtration against microorganisms and bacteria, viruses > 0,3 µm, odors (CTO) and volatile organic compounds (VOC).
silver impregnated.
The high-quality CARBON-BLOCK made from 100% coconut shells filters contaminants out of drinking water:
Reduction of:
- Bacteria and viruses
- Microorganisms
- Chlorine
- organic contaminants
- Pesticides
- Taste impairments
- Odor impairments and fine particles
- Solvents
- in addition, the filter removes oils and aromas
The coconut shell activated carbon has an exceptionally high micropore density, which means it can absorb more contaminants per gram. Activated carbon blocks that are made from 100% coconut shells are of higher quality than conventional activated carbon blocks from mass production in China.
Carbon blocks made from coconut shells are free from chemical additives or binders. Cheap activated carbon blocks from China contain additives and binders that could have a problematic effect on your drinking water.
Thanks to the high adsorption capacity, coconut shell activated carbon is more effective at removing chlorine, heavy metals, pesticides, organic chemicals and unpleasant odors.
Our activated carbon blocks made from coconut shells not only offer better filtration properties, but are also more environmentally friendly and sustainable.
Water filter cartridge suitable for all other standard 10-inch filter housings.
Please fill out the following form to submit your withdrawal request.