DP 10 MONO - 2-in-1 Combination Filter Activated Carbon Granules

DP 10 MONO - 2 in1 Household Water Filter

The filter serves as a combination filter with very good flow performance.

The 2 in 1 BTPP 25 mcr "melt blown" polypropylene combination filter with activated carbon granules filters out even the finest particles as well as unpleasant odors and flavors from the water caused by chlorine and other organic substances.

Removes pesticides, insecticides, solvents, sand, dust, rust, chlorine, and lime flakes.

The filter serves as a pre-filter, e.g. for water filter units or treatment systems; it has a good flow rate for reverse osmosis systems and produces clean water at a very affordable price.

The following contaminants are filtered out of the water:
- Sand
- Dust
- Rust
- Chlorine
- Lime flakes
- Odors
- Insecticides
- Solvents
- organic substances
- Pesticides

Technical use:
Anti-chlorine treatment in the food, chemical, and pharmaceutical industries, pre-treatment for the protection of reverse osmosis systems.

Flow rate at approx. 3 bar / approx. 1000l/h.


10" filter housing:
Height 325 mm Width 122 mm Depth 107 mm
3/4" connection with brass threaded inserts
Max. pressure 8 bar (116 psi)
Max. temp. 45 °C

FILTRATION:
1 x 2 in 1 combination filter BTPP 25 mcr "melt blown" polypropylene with activated carbon granules (Item No.: 4260303250571)
- Filtration of fine particles (rust, lime flakes, sand, flakes)
- Reduction of chlorine (bad taste and odor)
- Contaminants (pesticides, solvents, etc.)
- Service life: approx. 3 - 6 months (depending on water quality and throughput volume)
- 10" filter dimensions: 252 x 72 x 28 mm
- Max. flow rate at approx. 3 Bar pressure / approx. 1000l/h

Water filter cartridge suitable for all other standard 10 inch SX filter housings on the market.

You will receive 1 x filter housing, 1 x filter cartridge, 1 x W1 wall bracket and 1 x housing wrench packed in the box.