DP 10 MP CPP HA - 2-in-1 Combination Anti-Scale Filter
EAN: 4260303252209
€49,75
Including taxes. Shipping is calculated at checkout.
10 inch - 10" water filter set incl. anti-limescale protection filter filled with polyphosphate, double protection for washing machines, dishwashers etc., filtration of fine particles at 5 µm, easy installation on the cold water line, IN/OUT 1/2"
Pre-filter
Appliance protection filter
Drinking water filter
Manufacturer / Importer Information:
Atlas Filtri s.r.l.
Via Pierobon 32
35010 Limena (Padova)
Italy
DP 10 MP CPP HA - 2-in-1 combination filter and polyphosphate crystals
You receive a 10" filter housing made of polypropylene with quick connection on the filter housing - simply install it between the cold-water line.
The 2-in-1 combination filter BT CPP HA made of polypropylene with polyphosphate crystals filters the finest particles such as sand, dust, rust, limescale, and flakes down to 5 microns and provides double protection for washing machines, dishwashers, and water pipes.
Just 3 millimeters of limescale deposits on the heating elements of your washing machine already cause 50% higher power consumption per wash or dishwashing cycle . The limescale deposit on the washing machine heating element acts like an insulating layer for the water to be heated.
Your washing machine needs significantly more power to heat the wash water to the required temperature.
Protect your dishwasher and washing machine from limescale damage and prevent the heating elements from scaling up with a purway filter.
This increases the cleaning performance of the laundry detergent or dishwasher cleaner.
You need far less detergent and at the same time protect the environment
.
Water treated with polyphosphate can be heated to up to 75 °C - 80 °C; at higher temperatures, the polyphosphate gradually loses its effect.
Use:
Filtration and treatment of drinking water, household water, and wastewater; used to protect fittings, boilers, pumps, water tanks, washing machines, and other technical systems as well as the pipework.
10” filter housing:
Height 325 Width 125 Depth 107 mm
1/2" connection with plastic threaded bushings
Maximum pressure: 8.0 bar
Max. flow rate at approx. 3 bar / 1000 l/h.
Maximum operating temperature: 35 °C
10” filter dimensions BT CPP HA 10 SX AB 5 mcr (EAN:4260303251325)
Length: 252 mm
Width: 72 mm
Head opening: 28 mm
Maximum pressure: 8.0 Bar
Maximum operating temperature: 35 degrees Celsius
Max. water hardness: 500 ppm CaC03
Service life: approx. 6 months (depending on water quality and flow rate)
You will receive a filter housing including 1 filter cartridge, wall bracket with screws, and housing wrench packed in a box.