PFAS Armor 20 BIG SX 1 mcr KIT 20 Zoll

PFAS Armor 20 BIG SX 1 µm KIT with filter cartridge – NSF certified

What are PFAS?
PFAS (per- and polyfluorinated alkyl substances) are a group of industrial chemicals that have been used for decades in products such as Teflon pans, outdoor clothing, fire-fighting foams, and packaging because of their water-, grease-, and dirt-repellent properties. They are also known as “forever chemicals” because they are extremely persistent in the environment and break down only very slowly.

How can PFAS be removed from drinking water?

1. Choose suitable filtration systems:

   • Standard activated carbon filters usually remove only a few long-chain PFAS compounds (e.g.  PFOA, PFOS, trifluoroacetic acid TFA).

2. Use certified filters:

   • Look for NSF/ANSI 53 certifications – specifically for PFAS reduction. Our PFAS Armor filter cartridges from Atlas Filtri meet these requirements!

   • PFOA+PFOS reduction capacity tested with 1.5 µg/l in the inlet water – reduction of at least 95 %. This therefore meets the PFAS reduction criteria according to the NSF/ANSI 53–2021 test protocol.

3. Replace filters regularly:

   • An overloaded or outdated filter can become ineffective or even release contaminants again.

   • Please be sure to observe the replacement intervals recommended by the manufacturer.

As persistent pollutants, PFAS raise serious environmental and health concerns. They must therefore be removed from the water reliably.

The PFAS Armor filter cartridge was specially developed to filter PFOA and PFOS out of the water. In addition, chlorine, taste, odor, and other chemical residues are reliably removed.

20" inch filter dimensions:
Length: 617 mm
Width: 119 mm
Head opening: 190 mm
Temperature range: 4–45 °C
Recommended max. flow rate: 3.500 l/h
Service life: 12 months or approx. 113.000 liters / 113㎥

You will receive a water filter housing with PFAS filter cartridge including housing wrench and wall bracket – packed in a box.