DP 10 MONO - 2IN1 COMBINATION FILTER ACTIVATED CARBON GRANULES

DP 10 MONO - 2 in 1 house water filter

The filter serves as a combination filter with a very good flow performance.

The 2 in 1 Combination filter BTPP 25 mcr "melt blown" polypropylene with activated carbon granules Filters the finest particles as well as unpleasant odors and aromas from the water that are caused by chlorine and other organic substances.

Removal of pesticides, insecticides, solvents, sand, dust, rust, chlorine, lime flakes.

The filter serves as a pre-filter, for example in water filter devices or treatment systems, it has a good flow rate for osmosis systems and produces clean water at a very reasonable price.

The following pollutants are filtered out of the water:
- Sand
- Dust
- Rust
- Chlorine
- Lime flakes
- Odor impairments
- Insecticides
- Solvent
- organic substances
- Pesticides

Technical use:
Anti-chlorine treatment in the food, chemical and pharmaceutical industries, pre-treatment for the protection of reverse osmosis systems.

Flow rate at approx. 3 bar / approx. 1000l/h.


10" inch filter housing:
Height 325 mm Width 122 mm Depth 107 mm
3/4" inch connection with brass threaded sockets
Max. pressure 8 bar (116 psi)
Max. temp. 45 CC

FILTRATION:
1x 2 in 1 Combination filter BTPP 25 mcr "melt blown" polypropylene with activated carbon granules (Item No.: 4260303250571)
- Filtration of fine particles (rust, lime flakes, sand, scales)
- Reduction of chlorine (bad taste and smell)
- Harmful substances (pesticides, solvents, etc.)
- Lifespan: approx. 3 - 6 months (depending on the water quality and the flow rate)
- 10" inch filter dimensions: 252 x 72 x 28 mm
- Max. flow rate at approx. 3 bar pressure / approx. 1000l/h

Water filter cartridge suitable for all other standard 10 inch filter housings SX.

You will receive 1 x filter housing, 1 x filter cartridge, 1 x wall holder W1 and 1 x housing key packed in a box.