Technical data
10" filter housing
Dimensions: 325 x 155 x 107 mm (HxWxD)
Connection size: 1/2" male thread
Operating pressure: maximum 8.0 bar
Recommended max. flow rate: 300 l/h.
Temperature range: 4 - 45°C
Suitable for all 10" SX cartridges with flat seal
Suitable for drinking water applications
Material selection
Housing head: reinforced polypropylene
Housing cup: PET
O-ring: EPDM
CA-SE 10 SX 0.3 micron for the best drinking water filtration against microorganisms and bacteria > 0.3 µm
Manufacturer Importer Information:
purway Crystal Group®
BONGARTZ GMBH
CEO Claudia Bongartz
Am Königshof 63a
27478 Cuxhaven
Germany
E-Mail: info@purway.de
With quick connection on the filter housing - simply install between the cold water line.
The under-sink water filter incl. CB-SI 10 SD 0.3 mcr The filter cartridge is connected directly between the corner valve and the existing faucet. This way, all your cold water is filtered.
This complete filter offers a higher quality of water filtration than a table/jug water filter, as the carbon block is made of activated carbon and has a larger filter surface area.
With our under-sink water filter, large amounts of water can be filtered.
He is very easy to assemble thanks to its simple connection options.
The CARBON BLOCK filters some Microorganisms / Bacteria
Highest reduction of:
- ChlorThe filter cleans the water to crystal clear 0.3 microns .
Water filter cartridge suitable for all other standard 10-inch filter housings.
FILTRATION:
1 x CB-SI 10 SD 0.3 mcr - Activated Carbon Block Microfiltration - (EAN: 4260303252377)
You will receive a 10" filter housing including 1 x 10" carbon block, 1 x wall mount, and 1 x housing key packed in a box.
