Osmosis filter set of 3 25-10-1 micron for 1st to 3rd stage reverse osmosis

Osmosis filter set of 3 25-10-1 µm 1 x polypropylene wrap filter and 1 x melt blown polypropylene sediment filter as well as 1 x activated carbon block

Osmosis filter set of 3 with 25-10-1 micron - 2 x sediment cartridges made of polypropylene and 1 x PCB activated carbon block for the 1st to 3rd stage of a reverse osmosis system

The Polypropylene cartridges (1st and 3rd stage) are characterized by an excellent absorption capacity of impurities and filter the finest particles from the water.

They are ideal for Filtration of sand, mud, rust particles as well as others contained in tap water mechanical contamination.

Special features:
- Removal of mechanical contaminants (rust, sand, mud and other sediments)
- Excellent filtration results with low pressure loss

The filters clean the water to a crystal clear 25 or 1 micron.

10 inch filter dimensions:

Length: 250mm

Width: 61mm

Head opening: 28mm

The Carbon activated carbon block PCB (2nd stage) consists of pressed activated carbon and filters pollutants from the water such as chlorine, organic pollutants, light hydrocarbons, solvents, pesticides, oils and aromas, taste impairments, odor impairments, fine particles (rust, lime flakes, sand, scales) and Suspended solids.

The filter cleans the water to a crystal clear 10 microns.

10 inch filter dimensions:

Length: 248mm

Width: 70mm

Head opening: 26mm

Maximum temperature: 45 degrees Celsius

Lifespan: approx. 6 months (depending on the water quality and flow rate)

You will receive three filters packed in a box.