Replacement filter osmosis set of 3 10-PLAX-1 for 5 stage reverse osmosis system

Osmosis filter set of 3 for PUR Booster 5 stage reverse osmosis system 10-PLAX-1 µm 2 x "melt blown polypropylene sediment filter membrane and 1 x activated carbon granulate

Osmosis filter set of 3 with 10 and 1 micron - 2 x sediment cartridges made of polypropylene fleece and 1 x PLAX activated carbon granulate filter for the 1st to 3rd stage of a reverse osmosis system

The Polypropylene filter (1st and 3rd stages) are characterized by an excellent ability to absorb contaminants. Their structure is similar to the consistency of a sponge, whose surface has a particularly high number of open micropores.

They are ideal for Filtration of sand, mud, rust particles as well as others contained in tap water mechanical contamination.

Special features:
- Removal of mechanical contaminants (rust, sand, mud and other sediments)
- Excellent filtration results with low pressure loss

The filters clean the water to a crystal clear 10 or 1 micron.

Filter dimensions: 10" dimensions: length 250 mm x diameter 61 mm x head opening 28 mm

The Activated carbon granulate filter PLA (2nd stage) consists of coconut shells and filters pollutants from the water such as chlorine, organic pollutants, light hydrocarbons, solvents, pesticides, oils and flavors, taste impairments, odor impairments, fine particles (rust, lime flakes, sand, scales) and suspended matter .

10 inch filter dimensions:

Length: 248mm

Width: 70mm

Head opening: 26mm

Maximum temperature: 45 degrees Celsius

Lifespan: approx. 6 months (depending on the water quality and flow rate)

You will receive three filters packed in a box.