Control for PUR reverse osmosis systems including TDS measurement

Control for PUR reverse osmosis systems including TDS measurement.

The control unit processes the input signals from the high-pressure and low-pressure sensors and switches the booster pump and the solenoid valves of your PUR reverse osmosis system depending on the pressure condition.

Per button press "Washing", the control ensures a 45-second rinse, which is displayed via a timer.

The TDS measuring probe is inserted into a 1/4" quick connector. The following adapter is perfectly suitable for this: T-Adapter 1/4" x 1/4" x 1/4" hose angle adapter with safety clips - EAN: 4260303252797. The measuring range is 01 - 99 ppm. If exceeded, "OUA" is displayed.

Additionally, the following operating states are displayed on the individual 7-segment display:

• The system is in production mode
• Flush: A flush is being performed
• The system is filled and ready for operation
• Lack Blinkt: Low pressure switch has detected too low an input pressure
• Device is shutting down due to overheating

This control with integrated TDS measurement is used as standard in the following PUR reverse osmosis systems:

- PUR Booster 5 Stages 600 GPD Direct Flow Tankless Reverse Osmosis System - EAN: 4260303254760

 - PUR Smart PRO 800 GPD reverse osmosis system brushless tankless - EAN: 4260303255552

Included in the delivery:

• Control with TDS measuring probe
• Bracket

You receive a controller with a fixed TDS measuring probe.