DP 10 MONO - 2-in-1 Combination Filter Activated Carbon Granules

DP 10 MONO - 2 in1 House Water Filter

The filter serves as a combination filter with very good flow performance.

The 2 in 1 combination filter BTPP 25 mcr "melt blown" polypropylene with activated carbon granules filters the finest particles as well as unpleasant odours and flavours from the water caused by chlorine and other organic substances.

Removal of pesticides, insecticides, solvents, sand, dust, rust, chlorine, limescale flakes.

The filter serves as a pre-filter, e.g. for water filter systems or treatment systems. It has a good flow rate for reverse osmosis systems and produces clean water at a very affordable price.

The following contaminants are filtered from the water:
- Sand
- Dust
- Rust
- Chlorine
- Limescale flakes
- Odour impairments
- Insecticides
- Solvents
- organic substances
- Pesticides

Technical use:
Anti-chlorine treatment in the food, chemical, and pharmaceutical industries, pre-treatment for protecting reverse osmosis systems.

Flow rate at approx. 3 bar / approx. 1000l/h.


10" filter housing:
Height 325 mm Width 122 mm Depth 107 mm
3/4" connection with brass threaded inserts
Max. pressure 8 bar (116 psi)
Max. temp. 45 °C

FILTRATION:
1 x 2 in 1 combination filter BTPP 25 mcr "melt blown" polypropylene with activated carbon granules (Item no.: 4260303250571)
- Filtration of fine particles (rust, limescale flakes, sand, scales)
- Reduction of chlorine (bad taste and odour)
- Contaminants (pesticides, solvents, etc.)
- Service life: approx. 3 - 6 months (depending on water quality and the throughput volume)
- 10" filter dimensions: 252 x 72 x 28 mm
- Max. flow rate at approx. 3 bar pressure / approx. 1000l/h

Water filter cartridge suitable for all other standard 10 inch filter housings SX.

You will receive 1 x filter housing, 1 x filter cartridge, 1 x wall bracket W1 and 1 x housing key packed in a box.