DP 10 MONO BT CPP LA - 2-in-1 Combo Filter Activated Carbon Granules

DP 10 MONO - 2 in1 House Water Filter

The filter serves as a combination filter with very good flow performance.

The 2 in 1 BT CPP LA 25 mcr "melt blown" polypropylene combination filter with activated carbon granules filters out the finest particles as well as unpleasant odors and tastes from the water caused by chlorine and other organic substances.

Removal of pesticides, insecticides, solvents, sand, dust, rust, chlorine, limescale flakes.

The filter serves as a pre-filter, e.g. for water filter units or treatment systems; it has a good flow rate for reverse osmosis systems and produces clean water at a very affordable price.

The following contaminants are filtered out of the water:
- Sand
- Dust
- Rust
- Chlorine
- Limescale flakes
- Odor impairments
- Insecticides
- Solvents
- organic substances
- Pesticides

Technical use:
Anti-chlorine treatment in the food, chemical and pharmaceutical industries, pre-treatment for protecting reverse osmosis systems.

Flow rate at approx. 3 bar / approx. 1000l/h.


10" filter housing:
Height 325 mm width 122 mm depth 107 mm
3/4" connection with brass threaded bushings
Max. pressure 8 bar (116 psi)
Max. temp. 45 °C

FILTRATION:
1 x 2 in 1 combination filter BTPP 25 mcr "melt blown" polypropylene with activated carbon granules (item no.: 4260303250571)
- Filtration of fine particles (rust, limescale flakes, sand, flakes)
- Reduction of chlorine (bad taste and smell)
- Contaminants (pesticides, solvents, etc.)
- Service life: approx. 3 - 6 months (depending on water quality and the flow volume)
- 10" filter dimensions: 252 x 72 x 28 mm
- Max. flow rate at approx. 3 bar pressure / approx. 1000l/h

Water filter cartridge suitable for all other commercially available 10 inch SX filter housings.

You will receive 1 x filter housing, 1 x filter cartridge, 1 x wall bracket W1 and 1 x housing wrench packaged in a box.