DP DUO Sanic Set 3/4" - FA CPP 10 Antimicrobial
EAN: 4260303252049
€66,75
Including taxes. Shipping is calculated at checkout.
Technical Data
10" SANIC double filter housing:
Suitable for all standard 10" cartridges with flat gasket
Suitable for drinking water applications
Dimensions: 325 x 228 x 107 mm (HxWxD)
Operating pressure: maximum 8.0 bar
Temperature range: 4 - 45 °C
Material Selection
Housing head: reinforced polypropylene
Housing bowl: PET with antimicrobial protection
O-ring: EPDM
Vent valve: stainless steel, EPDM
Connection thread: CW 617 N brass
Water filter for motorhomes & caravans, yachts, boats and weekend homes
Pre-filter
Appliance protection filter
Drinking water filter
Manufacturer / Importer Information:
Atlas Filtri s.r.l.
Via Pierobon 32
35010 Limena (Padua)
Italy
DP DUO Sanic Set 3/4" - FA 10 SANIC 25 mcr and CPP 10 Sanic 1 mcr Antimicrobial
Water filter for motorhomes & caravans and holiday homes
The SANIC water filters with antimicrobial Microban® protection have a continuous effect against the spread of bacteria throughout their entire service life.
The 10" high-quality filter housing made of polypropylene is extremely space-saving.
The Microban® active ingredient is distributed so that every single filter pore has an effective antimicrobial
treatment. This reduces the possibility of microorganisms escaping
contact with the bactericidal agent to a minimum.
Use: The Microban® technology was developed not for purifying the water, but against the growth of bacteria on the housing and on the cartridge when the water filter is not used daily (stagnant water in the housing). The water filter is ideal for motorhomes & caravans and holiday homes.
The maximum bacteriostatic efficiency is achieved through the combination of cartridge and SANIC housing . The effectiveness of the housing without a cartridge is not guaranteed, and use with a cartridge that has not been treated with an antimicrobial agent is not recommended.
1 x 10” DOUBLE filter housing SANIC:
Height: 325 Width: 228 Depth: 107mm
IN / OUT connection made of brass in
3/4" inch
Maximum pressure: 8,0 bar
Max. temperature: 45 °C
1 x 10” sediment filter cartridge FA 10 SANIC 25 mcr:
Length: 250 mm Width: 61 mm Head opening: 28 mm
Max. temperature: 45 °C
Service life: approx. 6 months
Max. flow rate at approx. 3 bar / 2000 l/h
1 x 10” sediment filter cartridge CPP 10 SANIC 1 mcr:
Length: 250 mm Width: 61 mm Head opening: 28 mm
Max. temperature: 45 °C
Service life: approx. 6 months (depending on water quality and flow volume)
Max. flow rate at approx. 3 bar / 2000 l/h
You receive a SANIC DOUBLE filter housing, two SANIC filter cartridges in original packaging with wall bracket, screws, and housing wrench.