Skip to content
English Chevron
Home / Products / PFEX 10 SX IRON REMOVER - IRON FILTER CARTRIDGE
Quick View
Quick View
€15,95
Inclusive taxes. Shipment will be charged at checkout.
Show all data Link chevron
List Description
Settings TECHNICAL DATA
Information AREAS OF APPLICATION & INFORMATION

PFEX 10 SX IRON REMOVER - Iron filter cartridge is filled with filtering media to reduce the iron concentration in the water
 

The iron filter cartridge lowers the iron concentration, reduces the Hydrogen sulfide content, the metallic taste, and the smell of the Wassers.

A iron water filter is used to remove the iron and manganese content from the water. remove. These contaminants can be found in some water supply systems occurrences and can cause various problems, such as discoloration of the Deposits in pipes and appliances as well as an unpleasant taste or smell of the water. The immediate consequence of a high iron content in Water is the formation of rust edges on sanitary facilities (bathtubs, Spülbecken).

The filter cartridge is made with a mixture of pyrolusite and different filled with granulated quartz sand.

The dissolved FE² in water is converted to FE³, removing it from the water. The Iron filter uses hydrogen sulfide to oxidize Fe² to Fe³.


Reduction of:
Eisen up to a maximum value of 4.0 mg/l usable
Mangan usable up to a maximum value of 0.1 mg/l
Sulfite (up to 0.9 mg/l)
Oxide (up to 4.0mg/l)
Chloride (up to 4.8 mg/l)
Silicates (up to 35.0 mg/l)


The iron filter helps to normalize the pH value of the water.

- Iron Ion Treatment
- Odor disturbances and fine particles
- in addition, the filter removes light oils

To extend the lifespan, it is recommended to place a Install sediment cartridge of series FA or FAG.


The iron filter cartridge for reducing iron concentration

- Iron Ion Treatment
- Odor disturbances and fine particles
- in addition, the filter removes light oils
- Lifespan: approx. 6 months or approx. 3,000 l (depending on the iron- (max. 4 mg/l) and manganese levels (max. 0.1 mg/l) and the flow rate)
- Maximum temperature: up to 45 °C
- Recommended flow rate at approx. 3 bar / 1000l/h.

!With the iron filter cartridges, it may happen that initially granulate dust exit that occurs due to transport. Let the water sit for as long run until the water is clear. If necessary, only then install the following filters. danach ein!

PLEASE NOTE THE MAXIMUM VALUES. IF NECESSARY, CONDUCT A WATER ANALYSIS!

Test drops for determining the iron content in water (optional - Item No.: 8056300922834

Filter housing dimensions:

10" filter dimensions: 248 x 70 x 26 mm

Water filter cartridge suitable for all standard 10" filter housings



You will receive a filter packaged in a box.